-45%   PREISAKTION

Poster: Shielded metal arc welding, manual metal arc weld, flux shielded

Poster Shielded metal arc welding, manual metal arc weld, flux shielded arc weld or stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.
Poster:
Shielded metal arc welding, manual metal arc weld, flux shielded arc weld or stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld..
Autor: ©
Nr. des Fotos:
#211306297
Andere Themen:
Prozess, bedeckt, abgeschirmt, flux, Funke, Flammen, Taschenlampe, im Freien, horizontal
Vorschau des Zimmers
Ähnlich
The welder is welding a structural steel with gas metal arc welding ( GMAW ) in the workshop.
Safety of the manual sandblasting. Cleaning operations using abrasive blasting can present risks for workers' health and safety specifically in portable air blasting or blast room applications.
Professianal is inspection to pipe welds with ultrasonic testing. It is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested.
Close up view of sandblasting before coating. Abrasive blasting, more commonly known as sandblasting, is the operation of forcibly propelling a stream of abrasive material against a surface.
Ultrasonic examination to pipe welds. Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the manual operation requires careful attention by experienced technicians.
View of the crack between weld metal and base metal ( heat affected zone, haz) and magnetic particle inspection. It is a crack that forms a short distance away from the fusion line.
A technician tests a pipeline weld for defects using ultrasonic instrument. Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves.
A technician tests a pipeline weld for defects using magnetic particle test instrument. It is a non-destructive testing (NDT) process for detecting surface and shallow subsurface discontinuities.
Manual preheating with a flame torch to joint of the pipeline before welding. It involves heating the base metal, either in its entirety or just the region surrounding the joint.
The welder is preheating to pipeline before welding. The phenomenon of heating the joint in the weld zone before the commencement of welding procedure is known as pre-heating.
Welder test and qualification (Horizontal position). It is a process which examines and documents a welder's capability to create welds of acceptable quality following a well defined.
Close up view of the gas metal arc welding (GMAW), also known as metal inert gas or MIG welding. In addition to melting the base metal, a filler material is typically added to the joint to form a pool
Gas metal arc welding (GMAW), also known as metal inert gas or MIG welding. A related process, flux-cored arc welding (FCAW), uses similar equipment but uses wire consisting of a steel electrode.
Casting iron in a sand mold. Metal is heated until it becomes liquid and is then poured into a mold. The mold is a hollow cavity that includes the desired shape.
Industrial furnace for steel and iron casting. A furnace is a device used for high-temperature heating. The heat energy to fuel a furnace may be supplied directly by fuel combustion.
The workers are working near to big smelter in the factory.
Engineer is inspection to pipe welds with ultrasonic testing. Reflected ultrasound comes from an interface, such as the back wall of the object or from an imperfection within the object.
Magnetic particle testing (MPT), or magnetic particle inspection, is a non destructive examination (NDE) technique used to detect surface and slightly subsurface flaws in most ferromagnetic materials.
The welder is welding a structural steel with gas metal arc welding ( GMAW ) in the workshop.
Shielded metal arc welding. It is also known as manual metal arc welding (MMAW) or stick welding.
The welder is welding with shielded metal arc welding, manual metal arc welding or stick welding. Electric current is used to strike an arc between the base material and consumable electrode rod.
The welder is welding with covered electrode in the factory. Stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.
The welder is repairing to reinforcement plate of the nozzle of the storage tank after the liquid penetrant testing. Dye penetrant inspection, also called liquid penetrate inspection.
View of the oxygen, fuel  and flame cutting with welding torch.
Welder test and qualification. It is a process which examines and documents a welder's capability to create welds of acceptable quality following a well defined welding procedure.
The welder is welding to steel profile with covered electrode in the workshop. There is some puddle of snow on the floor.
The welder is welding with shielded metal arc welding (SMAW). It is also known as manual metal arc welding (MMAW) or stick welding. Electric current is used to strike an arc.
Shielded metal arc welding. The process is versatile and can be performed with relatively inexpensive equipment, making it well suited to shop jobs and field work.
Sandblasting, abrasive or bead blasting. It is a generic term for the process of smoothing, shaping and cleaning a hard surface by forcing solid particles across that surface at high speeds.
Sandblasting, abrasive or bead blasting. It is a generic term for the process of smoothing, shaping and cleaning a hard surface by forcing solid particles across that surface at high speeds.
Sandblasting, abrasive or bead blasting. It is a generic term for the process of smoothing, shaping and cleaning a hard surface by forcing solid particles across that surface at high speeds.
Shielded metal arc welding. The process is versatile and can be pherformed with relatively inexpensive equipment, making it well suited to shop jobs and field work.
Shielded metal arc welding. The process is versatile and can be performed with relatively inexpensive equipment, making it well suited to shop jobs and field work.
The welder is preheating to pipeline before welding. The phenomenon of heating the joint in the weld zone before the commencement of welding procedure is known as pre-heating.
The welder is preheating to pipeline before welding. The phenomenon of heating the joint in the weld zone before the commencement of welding procedure is known as pre-heating.
The weldolet welding to the pipe with GTAW, tig or argon process.
The welder is GTAW (tig,argon) welding to the weldolet on the pipe.
Gas metal arc welding (GMAW, MAG, MIG). MIG welding is a metal shielding gas welding process (GMAW) with inert gas, in which the light arc burns between a continuously fed melting wire electrode.
Gas metal arc welding (GMAW, MAG, MIG). MIG welding is a metal shielding gas welding process (GMAW) with inert gas, in which the light arc burns between a continuously fed melting wire electrode.
View of the manual oxygen cutting and welding tool in the construction site. Welding in the U.S. and oxy-fuel cutting are processes that use fuel gases (or liquid fuels such as gasoline).
The welder is repairing steel material. The repair welding location or area must be surveyed and all safety considerations satisfied.
Close up view of sandblasting before coating. Abrasive blasting, more commonly known as sandblasting, is the operation of forcibly propelling a stream of abrasive material against a surface.
The welder cutting the rebars with oxy fuel. The oxyfuel process is the most widely applied industrial thermal cutting process. The equipment is low cost and can be used manually or mechanised.
The welder cutting the rebars with oxy fuel. The oxyfuel process is the most widely applied industrial thermal cutting process. The equipment is low cost and can be used manually or mechanised.
The manual welder is repairing with a grinding machine and shielded metal arc welding. It also known as manual metal arc welding, flux shielded arc welding or informally as stick welding.
Sandblasting, abrasive or bead blasting. It is a generic term for the process of smoothing, shaping and cleaning a hard surface by forcing solid particles across that surface at high speeds.
Oxy fuel cutting. In oxy-fuel cutting, a torch is used to heat metal to its kindling temperature. A stream of oxygen is then trained on the metal, burning it into a metal oxide.
Oxy-fuel cutting and welding. Commonly called oxyacetylene welding, oxy welding or gas welding in the U.S. Oxy-fuel cutting are processes that use fuel gases and oxygen to weld and cut metals.
The metal worker is cutting a steel material with circular saw machine and sparks. A circular saw is a tool for cutting many materials such as wood, masonry, plastic or metal and may be hand-held.
The metal worker cutting a steel material with circular saw and sparks. A circular saw is a power-saw using a toothed or abrasive disc or blade to cut different materials using.
View of the sparks and smoke of the shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding or informally as stick welding.
View of the sparks and smoke of the shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW).
View of the nondestructive testing methods with multiple photos. Nondestructive testing (NDT) is a wide group of analysis techniques used in science and technology industry to evaluate.
Workers' health and safety of the sandblasting. Many abrasives used in blasting rooms are not hazardous in themselves, (steel shot and grit, cast iron, aluminum oxide, garnet.
Welder test with gas tungsten arc welding (GTAW) or tungsten inert gas welding process at 6G position for steel pipe.
View of the welding procedure qualification and welder test for pipe (HL-045 or 6G position). Welders performing the 6G certification test must weld in all positions including horizontal and vertical.
Qualification of welders and welding procedures for fillet weld. The main part of the welder's test consists of welding one or more test coupons which are then examined using non-destructive.
Close up view of sandblasting before coating. Abrasive blasting, more commonly known as sandblasting, is the operation of forcibly propelling a stream of abrasive material against a surface.
Close up view of sandblasting before coating. Abrasive blasting, more commonly known as sandblasting, is the operation of forcibly propelling a stream of abrasive material against a surface.
Ultrasonic or ultrasound testing to copper casting material. A common example is ultrasonic thickness measurement, which tests the thickness of the test object.
Ultrasonic or ultrasound testing to copper casting material. A common example is ultrasonic thickness measurement, which tests the thickness of the test object.
Ultrasonic thickness measurement. It is a non-destructive measurement of the local thickness of a solid element based on the time taken by the ultrasound wave to return to the surface.
Inspector is testing of the steel pipe welds with ultrasonic test method. It is a non-destructive test method. It can also be used to determine a material's thickness, such as measuring the wall.
Inspector is testing of the steel pipe welds with ultrasonic test method. It is a non-destructive test method. It can also be used to determine a material's thickness, such as measuring the wall.
Magnetic particle testing (MPT), or magnetic particle inspection, is a non destructive examination (NDE) technique used to detect surface and slightly subsurface flaws in most ferromagnetic materials.
Professianal is inspection to pipe welds with ultrasonic testing. It is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested.
Inspector is inspection to pipe welds with ultrasonic testing. Reflected ultrasound comes from an interface, such as the back wall of the object or from an imperfection within the object.
Fit-up control of the butt joint of the pipeline with welding gauge. This gauge's type is a bridge cam. It can measurement; angle, capping size, depth of undercut, depth of pitting.
View of sandblasting before coating. Abrasive blasting, more commonly known as sandblasting, is the operation of forcibly propelling a stream of abrasive material against a surface.
View of sandblasting before coating. Abrasive blasting, more commonly known as sandblasting, is the operation of forcibly propelling a stream of abrasive material against a surface.
Pipe external fit-up clamp for piping installation
Magnetic particle testing (MPT), or magnetic particle inspection, is a non destructive examination (NDE) technique used to detect surface and slightly subsurface flaws in most ferromagnetic materials.
View of the ultrasonic testing for weld metal. Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested.
Qualification of welders and welding procedures for fillet weld. The main part of the welder's test consists of welding one or more test coupons which are then examined using non-destructive.
Qualification of welders and welding procedures for fillet weld. The main part of the welder's test consists of welding one or more test coupons which are then examined using non-destructive.
Close up view of the manual industrial ultrasonic inspection for weld metal. Conventional ultrasonic testing limits thicknesses that can be examined to less than 8mm.
Ultrasonic examination to pipe welds. Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the manual operation requires careful attention by experienced technicians.
Ultrasonic or ultrasound testing to copper casting material. A common example is ultrasonic thickness measurement, which tests the thickness of the test object.
Close up view of sandblasting before coating. Abrasive blasting, more commonly known as sandblasting, is the operation of forcibly propelling a stream of abrasive material against a surface.
View of sandblasting before coating. Abrasive blasting, more commonly known as sandblasting, is the operation of forcibly propelling a stream of abrasive material against a surface.
mehrAusblenden
Produktbeschreibung

Poster

Die Standard-Poster von myloview werden auf qualitativ hochwertigem Plakatpapier mit Satinbeschichtung gedruckt. Dabei arbeiten wir mit der technisch hochmodernen HP Latex-Technologie, um satte und lebendige Farben zu gewährleisten. Die Deko kann direkt nach dem Auspacken der Sendung an der Wand aufgehängt werden.

Stärke des Posterpapiers: 200g/m2
Verfügbare Extras: Das Poster kann auf Wunsch gerahmt werden (schwarzer/silberner Aluminiumrahmen oder Cliprahmen nach Wahl)
Reinigung: Das Material kann mit einem feuchten Tuch abgewischt werden.


Poster im Rahmen

Die Standard-Poster von myloview werden auf qualitativ hochwertigem Plakatpapier mit Satinbeschichtung gedruckt. Dabei arbeiten wir mit der technisch hochmodernen HP Latex-Technologie, um satte und lebendige Farben zu gewährleisten. Die Deko kann direkt nach dem Auspacken der Sendung an der Wand aufgehängt werden.

Das Poster wird mit einem schwarzen oder silbernen Aluminiumrahmen geliefert.

Stärke des Posterpapiers: 200g/m2
Im Set: Aluminiumrahmen, je nach Wahl schwarz oder silbern.
Reinigung: Das Material kann mit einem feuchten Tuch abgewischt werden.


Poster im Cliprahmen

Die Standard-Poster von myloview werden auf qualitativ hochwertigem Plakatpapier mit Satinbeschichtung gedruckt. Dabei arbeiten wir mit der technisch hochmodernen HP Latex-Technologie, um satte und lebendige Farben zu gewährleisten. Die Deko kann direkt nach dem Auspacken der Sendung an der Wand aufgehängt werden.

Das Poster wird mit einem Cliprahmen geliefert.

Stärke des Posterpapiers: 200g/m2
Im Set: Cliprahmen
Reinigung: Das Material kann mit einem feuchten Tuch abgewischt werden





mehrAusblenden
Siehe auch
View of shelled walnuts in palm. A walnut is the edible seed of a drupe, and thus not a true botanical nut. It is commonly consumed as a nut.
Background of the dried walnuts. Walnut meats are available in two forms; in their shells or shelled. The meats may be whole, halved, or in smaller portions due to processing.
The white colored goose (pilgrim) looking at camera. The pilgrim is more like a fast growing and sturdy geese breed which is desirable for varying reasons and features.
View of the guinea fowls (hen) or iranian fowls. Guineafowl are birds of the family Numididae in the order Galliformes. They are endemic to Africa and rank among the oldest of the gallinaceous birds.
Engineer is inspection to pipe welds with ultrasonic testing. Reflected ultrasound comes from an interface, such as the back wall of the object or from an imperfection within the object.
View of the guinea fowls (hen) or iran fowls. Domestic guineafowl, sometimes called pintades, pearl hen, or gleanies, are poultry originating from Africa.
Inspector is ultrasonic testing to pipe welds. Ultrasonic Testing (UT) uses high frequency sound waves. (typically in the range between 0.5 and 15 MHz) to conduct examinations and make measurements.
Close up view of the manual industrial ultrasonic inspection for weld metal. Conventional ultrasonic testing limits thicknesses that can be examined to less than 8mm.
View of the ultrasonic testing for weld metal. Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested.
View of the big induction furnace and melting pot in foundry for smelting. The ores of base metals are often sulfides. In recent centuries, reverberatory furnaces have been used to keep the charge.
View of the bolt, nuts and washer. A fastener (US English) or fastening (UK English) is a hardware device that mechanically joins or affixes two or more objects together.
View of the bolt, nuts and washer. A fastener (US English) or fastening (UK English) is a hardware device that mechanically joins or affixes two or more objects together.
Ultrasonic or ultrasound testing to copper casting material. A common example is ultrasonic thickness measurement, which tests the thickness of the test object.
Close up view of flange internal diameter measurement with digital vernier caliper micrometer. A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw.
Background of the dried walnuts. Walnut meats are available in two forms; in their shells or shelled. The meats may be whole, halved, or in smaller portions due to processing.
View of the big induction furnace and melting pot in foundry for smelting. The ores of base metals are often sulfides. In recent centuries, reverberatory furnaces have been used to keep the charge.
Professianal is inspection to pipe welds with ultrasonic testing. It is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested.
Molten copper is pouring to melting pot. Campfires are about 200 °C short of the temperature needed, so some propose that the first smelting of copper may have occurred in pottery kilns.
Worker is measuring to the diameter of the small pipe with a digital vernier caliper micrometer. Micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw.
Worker is measuring to the diameter of the small pipe with a digital vernier caliper micrometer. Micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw.
Internal diameter of weldolet measuring with the digital vernier caliper micrometer. A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw.
View of the big crawler crane is working in the consruction field.
Outer diameter of weldolet measuring with the digital vernier caliper micrometer. A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw.
Inspector evaluation radiographs of the welds with viewer. The weld metal has some defects (porosities). ASTM 1A and 6 is an ASME standard penetrameter. V1-2: Weld no.
View of the bolts and nuts (fasteners). A bolt is a form of threaded fastener with an external male thread. Bolts are very closely related to screws. Bolts are often used to make a bolted joint.
Welder test with gas tungsten arc welding (GTAW) or tungsten inert gas welding process at 6G position for steel pipe.
Molten copper is pouring to melting pot. Combining copper with tin and/or arsenic in the right proportions produces bronze, an alloy that is significantly harder than copper.
Molten copper is pouring to melting pot of the transport vehicle with rail. Smelting is a process of applying heat to ore in order to extract a base metal. It is a form of extractive metallurgy.
Qualification of welders and welding procedures for fillet weld. The main part of the welder's test consists of welding one or more test coupons which are then examined using non-destructive.
The worker is holding a bolt with nut and washer. A bolt is a form of threaded fastener with an external male thread. A nut is a type of fastener with a threaded hole.
The worker is using personal protective equipments. For healthcare professionals caring for people with covid-19, the CDC recommends placing the person in an airborne infection isolation room.
Ultrasonic thickness measurement. It is a non-destructive measurement of the local thickness of a solid element based on the time taken by the ultrasound wave to return to the surface.
View of the ball micrometer gauge, caliper micrometer gauges and steel materials on the table.
Traditional smeltery. In metalworking and jewellery making, casting is a process in which a liquid metal is somehow delivered into a mold that contains a negative impression of the intended shape.
Inspector is checking pipe welds with manual ultrasonic device. Ultrasonic testing for ferritic steel welds. The techniques in general include scans with different angles from either side of the weld.
A lot of bolts and nuts on the table. A bolt is a form of threaded fastener with an external male thread. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts.
View of the bolt, nut and washer (fasteners). Bolts are for the assembly of two unthreaded components, with the aid of a nut. Screws in contrast are used in components which contain their own thread.
A lot of bolts and nuts on the table. A bolt is a form of threaded fastener with an external male thread. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts.
The worker is using personal protective equipments. For healthcare professionals caring for people with covid-19, the CDC recommends placing the person in an airborne infection isolation room.
Ultrasonic examination to pipe welds. Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the manual operation requires careful attention by experienced technicians.
Molten metal is pouring to melting pot. Combining metal with tin and/or arsenic in the right proportions produces steel.
Banana garden and banana greenhouse. Bananas are a staple starch for many tropical populations. Depending upon cultivar and ripeness, the flesh can vary in taste from starchy to sweet.
View of the cigarettes and tobacco. Tobacco contains the alkaloid nicotine, which is a stimulant, and harmala alkaloids. Dried tobacco leaves are mainly used for smoking in cigarettes, cigars.
Background of the black and white cumulus clouds under the beautiful blue sky. Clouds exert numerous influences on Earth's troposphere and climate.
The truck and dust. A truck or lorry is a motor vehicle designed to transport cargo. Trucks vary greatly in size, power, and configuration.
Sea pollution and turtle ( caretta caretta ). Marine debris is mainly discarded human rubbish which floats on, or is suspended in the ocean.
Storage tanks and pipelines. Storage tanks are containers that hold liquids, compressed gases or mediums used for the short- or long-term storage of heat or cold.
Qualification of welders and welding procedures for fillet weld. The main part of the welder's test consists of welding one or more test coupons which are then examined using non-destructive.
Sea pollution is an important danger for marine life. In order to protect the ocean from marine pollution, policies have been developed internationally.
Prickly pears. In Mexico, prickly pears are often used to make appetizers, soups, and salads through entrees, vegetable dishes, and breads.
Prickly pears. In Mexico, prickly pears are often used to make appetizers, soups, and salads through entrees, vegetable dishes, and breads.
Two excavators are digging and loading the excavation to two trucks in the construction site. After the Industrial Revolution, mechanization via steam shovels and later hydraulic equipment.
Close-up cotton in the cotton field in Cukurova valley. Organic cotton is generally defined as cotton that is grown organically in subtropical countries such as China, and parts of the USA.
Welding process of polyethylene pipes. Before beginning any pipe fusions, keep in mind that potentially dangerous equipment will be used in this guide.
Welding process of polyethylene pipes. Correctly designed equipment with proper maintenance: Correct welding temperatures, welding procedures and pipe facing tools must be maintained in tolerance .
Pressure gauge (Manometer) displays 330 bar. EN 837-1 Standard: Pressure gauges- Part 1: Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing. Cl 2.5: Accuracy class.
Land tortoise (Turtle). Cryptodires retract their neck backwards. Turtles are diapsids of the order Testudines (or Chelonii) characterized by a special bony or cartilaginous shell.
The welder is welding to a steel plate. Welding is the process of joining two plastic or metal parts by melting them with or without using a further molten material.
Molten copper is pouring to melting pot of the transport vehicle with rail. Smelting is a process of applying heat to ore in order to extract a base metal. It is a form of extractive metallurgy.
View of the cigarettes and tobacco. Tobacco use is a risk factor for many diseases, especially those affecting the heart, liver, and lungs, as well as many cancers.
Hydrostatic test and manometer (pressure gauge) of the process piping in the workshop. Pressure tightness can be tested by shutting off the supply valve and observing whether there is a pressure loss.
Close up view of the cigarettes and tobacco. Tobacco is a product prepared from the leaves of the tobacco plant by curing them. The plant is part of the genus nicotiana.
Oxy-fuel cutting and welding. Commonly called oxyacetylene welding, oxy welding or gas welding in the U.S. Oxy-fuel cutting are processes that use fuel gases and oxygen to weld and cut metals.
The fresh jumbo shrimp (prawn) in the human hand. Prawn and shrimp serve as nursery areas and habitats for commercially valuable shrimp and prawns.
The pollution of marine and sea turtles. Air pollution is also a contributing factor by carrying off pesticides or dirt into the ocean. Land and air pollution have proven to be harmful to marine life.
View of the sparks and smoke of the shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW).
Ultrasonic or ultrasound testing to copper casting material. A common example is ultrasonic thickness measurement, which tests the thickness of the test object.
Ultrasonic examination to pipe welds. Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the manual operation requires careful attention by experienced technicians.
View of the welding procedure qualification and welder test for pipe (HL-045 or 6G position). Welders performing the 6G certification test must weld in all positions including horizontal and vertical.
View of the sparks and smoke of the shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding or informally as stick welding.
Banana bunch of banana tree. Banana fiber harvested from the pseudostems and leaves of the plant has been used for textiles in Asia since at least the 13th century.
Banana bunch of banana tree. Banana fiber harvested from the pseudostems and leaves of the plant has been used for textiles in Asia since at least the 13th century.
Flame cutting is a destructive phenomenon that occurs in some firearms (usually revolvers) as a result of hot gases under high pressure.
Sea pollution is an important danger for marine life. In order to protect the ocean from marine pollution, policies have been developed internationally.
Close up cotton on the branch in the field.
Inspector is measuring diameter of the bolts with a manual verniel caliper micrometer gauge. The Vernier caliper is an extremely precise measuring instrument; the reading error is 1/20 mm = 0.05 mm.
The loggerhead sea turtle ( Caretta Caretta ) has a low reproductive rate; females lay an average of four egg clutches and then become quiescent.
The electric rail system and pouring liquid copper slag of the casting in the construction site. Casting is a manufacturing process in which a liquid material is usually poured into a mold.
The welder is repairing steel material. The repair welding location or area must be surveyed and all safety considerations satisfied. This can include the posting of the area.
Oxy-fuel cutting. In oxy-fuel cutting, a torch is used to heat metal to its kindling temperature. A stream of oxygen is then trained on the metal, burning it into a metal oxide.
mehrAusblenden
Mit dieser Taste können Sie die gewählte Größe zu drehen und mit der Höhe Breite ersetzen.

Unser Online-Shop verwendet Cookies und ähnliche Technologien. Diese werden eingesetzt, um Ihnen die höchste Servicequalität zu bieten und den reibungslosen Betrieb der Website zu garantieren. Mit Ihrer Zustimmung werden Cookies auch zur zusätzlichen Messung und Analyse der Nutzung der Website verwendet. So können wir die Website an Ihre Interessen anpassen und Ihnen personalisierte Inhalte und Werbung anzeigen.
Der Administrator Ihrer Daten ist Fairbox Sp. z o.o., und in bestimmten Situationen auch unsere Partner, mit denen wir zusammenarbeiten. Ausführliche Informationen zur Verwendung von Cookies und zur Verarbeitung Ihrer personenbezogenen Daten finden Sie in unserer Datenschutz- und Cookie-Erklärung.
Cookie-Einstellungen
Nachfolgend finden Sie Beschreibungen der einzelnen Kategorien von Cookies und die Möglichkeit, diese an Ihre Präferenzen anzupassen:
Essenziell
Wir verwenden essenzielle Cookies, um sicherzustellen, dass die Website ordnungsgemäß funktioniert. Sie ermöglichen es Ihnen, ohne Unterbrechung in unserem Shop zu stöbern und sicher einzukaufen.
Funktional
Funktionale Cookies werden verwendet, um die von den Benutzern auf der Website getroffenen Entscheidungen zu speichern, was hilft, die Website an Ihre persönlichen Vorlieben anzupassen und die Benutzererfahrung zu verbessern.
Analytisch
Analytische Cookies messen die Anzahl der Besuche und sammeln Informationen über die Traffic-Quellen. Sie ermöglichen es uns, zu verstehen, wie Benutzer die Website verwenden, die Qualität des Dienstes zu verbessern und den Inhalt des Online-Shops anzupassen, um die Erwartungen unserer Kunden zu erfüllen.
Marketing
Marketing-Cookies ermöglichen es uns und unseren Partnern, Werbeinhalte auf Ihre Interessen abzustimmen. Sie werden auch dazu verwendet, Werbung auf anderen Websites anzuzeigen.